Kingwood Underground
the heart and soul of our Kingwood, Texas family
Login - Create Account - Help
Clean out your garage on Kingwood bookoo! Or find local garage sales on Yard Sale Search.com
KU Live!

No water in dish washer

who's talking here?

*Annie* 3
movedagain 1
ajs_mom 1
Jenn789 1
carmineskeeper 1
offroad4by4 1

     » send to friend     » save in my favorites     » flag dangerous topic flag as a dangerous topic

*Annie* --- 18 years ago -

My GE dishwasher is a bit more than 4 years old. When I started it up last night, I noticed the absence of water sounds. I opened the door to see my suspicions correct. No water in dishwasher but the sink faucet is running just fine. Anyone know some trouble shooting tips prior to calling for service?  

movedagain --- 18 years ago -

Here is a link, http://www.repairclinic.com/0088_9_1.asp I would try taking all the parts out and making sure there is not stuff clogging the bottom. Usually you can take off the spinny arm if there is one. 

*Annie* --- 18 years ago -

Thanks! I'll look at it this evening. 

Jenn789 --- 18 years ago -

when we set our dishwasher on a different setting we noticed lack of water also. changed the setting and it started working again 

ajs_mom --- 18 years ago -

i had this happen to me with a Kenmore dishwasher that is only about 4 years old. Had a bad motor that needed to be replaced. Hopefully that is not your case. Good Luck! 

carmineskeeper --- 18 years ago -

That would be the water connection... check for a kink or if its disconnected. it happens with my refrigerator and it makes no ice. 

*Annie* --- 18 years ago -

Odd... I decided to give it a second chance tonight. Seems to be working fine. I'll keep an eye on it though! 

offroad4by4 --- 18 years ago -

Could you hear the motor running or any slugging? There is a wire mess screen on the water inlet below the dishwasher. We had to clean ours ~ once a year (KW - Houston). The problem is the water sometimes makes it thourgh, and sometimes does not. You can't tell if your dishes are really clean when its done or not. Look for a brass fitting shaped like an L. You will need to turn off the water, unscrew the fitting, blow water through it backwards to remove any debris, put plumbers tape back on the threads and screw it back on. Finally test for leaks. Houston loves to high pressure their water systems a couple of times each year, which breaks loose sludge or deposits and clogs the screen up. We finally had to put a filter on our house to keep the Houston pipeline debris out and replace our water heater (a three year old water heater had enough pipeline sludge in the bottom that it ruined it and sent sludge throughout places in the house as well). 

page 1
Login to add your comments!

see more discussions about...

advice


Online now:
hit counters

Terms of Service - Privacy Policy - Ice Box

Kingwood Underground