Kingwood Underground
the heart and soul of our Kingwood, Texas family
Login - Create Account - Help
Clean out your garage on Kingwood bookoo! Or find local garage sales on Yard Sale Search.com
KU Live!

Water heater help

who's talking here?

planemom 1
Flower Child 3
luvmylars 6
bestwishes99 2

     » send to friend     » save in my favorites     » flag dangerous topic flag as a dangerous topic

luvmylars --- 18 years ago -

The PVC pipe putting cold water into the tank has broken off, leaving its thread inside the top of the tank! How do I reattach it????... TIA!!! 

Flower Child --- 18 years ago -

I have NO IDEA! I'll pray for you though :) 

bestwishes99 --- 18 years ago -

I'm not a plumbing expert but it seems to me that you are going to have to unscrew the piece that is broken off and get it out. Then you are going to have to get some of that glue stuff and a connector and fix it like that. Hope that helps some!!! 

luvmylars --- 18 years ago -

Thanks, FC! I need it! We have no hot water, dh doesn't know a THING about this kind of stuff, and I'm only RELATIVELY mechanically inclined! BLURG! (As Liz Lemon of 30 Rock would say ;)) 

luvmylars --- 18 years ago -

I cannot get the thread from the PVC pipe out! :( 

bestwishes99 --- 18 years ago -

You know how they say to try a potatoe when a light bulb breaks? Can you try that? I know it sounds stupid but... it might work? haha 

planemom --- 18 years ago -

Using a hacksaw blade carefully cut from the inner (broken) portion to the outside edge stopping at the threads. Cut a few small segments, maybe a quarter to a half inch apart and use a screwdriver and a hammer to pop the segment out. Once you have broken a piece or two out what remains of the plug should be able to be removed fairly easily. I got that answer from here. 

luvmylars --- 18 years ago -

Thank, plane... I don't think I have a hacksaw, but maybe I'll try my utility knife the same way. 

Flower Child --- 18 years ago -

Using a hacksaw blade carefully cut from the inner (broken) portion to the outside edge stopping at the threads. Cut a few small segments, maybe a quarter to a half inch apart and use a screwdriver and a hammer to pop the segment out. Once you have broken a piece or two out what remains of the plug should be able to be removed fairly easily. WOW! You go girl! I love women who know how to do stuff. I'm such a girly girl I don't even know what a hacksaw blade is :) 

luvmylars --- 18 years ago -

Alright - I finally got it! Guy at the hardware store suggested something that worked! WOO HOO! I pried it out by using a large flat head screwdriver and a hammer! :) Then I used a hacksaw (found out I had an old one in the laundry house that just needed a new blade) to trim the line, and cemented it to a new coupling and base! I'm a handy momma! LOL I should be able to turn our hot water back on and use it again in a couple of hours! Oh, I also took off the insulation that was all over the water heater and discovered we have a button to reset the heater, which was the problem to begin with! LOL 

Flower Child --- 18 years ago -

I'm a handy momma Yes you are - I'm impressed! 

luvmylars --- 18 years ago -

You think that's impressive? A few weeks ago, I replaced the toilet tank kit and the faucet in the kitchen sink! hee hee hee 

page 1
Login to add your comments!

see more discussions about...

advice
help
recommendations


Online now:
hit counters

Terms of Service - Privacy Policy - Ice Box

Kingwood Underground