Kingwood Underground
the heart and soul of our Kingwood, Texas family
Login - Create Account - Help
Clean out your garage on Kingwood bookoo! Or find local garage sales on Yard Sale Search.com
KU Live!

Ink Jet Iron-On Transfer - What a Mess!

who's talking here?

HIAAK 1
Zionist NightOwl 2
AshleyTHEPrincess$ 1
UnderTaker 1
Pretty In Pink 3

     » send to friend     » save in my favorites     » flag dangerous topic flag as a dangerous topic

Pretty In Pink --- 16 years ago -

I've ruined two shirts and I'm getting very frustrated! It keeps bleeding! The shirts are totally dry, and I let the transfer paper dry for an hour after it came out of the printer. Any suggestions? 

Zionist NightOwl --- 16 years ago -

Yikes! DD is going to be making a couple of shirts for a school project over the next week using the ink jet iron-on transfer sheets. Let me know how this turns out and what solution you come up with. 

Pretty In Pink --- 16 years ago -

Ugh! Just tried a different iron and ruined ANOTHER shirt! I'm getting very grouchy. :( 

UnderTaker --- 16 years ago -

need to let the ink to dry at least 24 hrs before you transfer them onto your shirt . also put a towel over the transfer before you iron it . 

HIAAK --- 16 years ago -

need to let the ink to dry at least 24 hrs before you transfer them onto your shirt . also put a towel over the transfer before you iron it . this is what I have always done in the past too... 

AshleyTHEPrincess$ --- 16 years ago -

I used some a couple weeks ago and didnt have a problem... are you using the Avery kind? 

Zionist NightOwl --- 16 years ago -

Unrelated to your original question, but I found these instructions about caring for the shirts once they're done: Extra care must also be taking when drying, since most home dryers can reach temperatures high enough to melt the adhesive. It is often a requirement of "home made" garments (adhesive based transfers) that they be washed inside out, only in cold water, sometimes by hand, and not be tumble dried. The heat from washing or drying conventionally, or from ironing over the transfer area, can damage the transfer or cause it to separate. These attributes generally makes them less practical for frequent wear than purchased items. . . . The transfer sheet is place ink side down onto a t-shirt or fabric and ironed (without steam) onto the cloth. Some transfer sheets change color to signal that the transfer is finished. To create a glossy effect with adhesive based transfers, the transfer sheet is removed after it has been cooled down. To create a matte effect, it is peeled off while still hot. http://en.wikipedia.org/wiki/Inkjet_transfer 

Pretty In Pink --- 16 years ago -

We used June Tailor "Dark T-Shirt Transfer" paper from Hobby Lobby, and followed the directions exactly. I looked up troubleshooting tips online and they suggested printing with less ink so we also tried that. No luck!! We're making a dippy t-shirt for a white elephant gift exchange tomorrow and finally decided that the bleed marks just add to the "charm" of the gift. If I ever try this again (doubtful!) I will let the picture dry for a day and use Avery instead. Live and learn. Thanks for the advice! :) 

page 1
Login to add your comments!

see more discussions about...


Online now:
hit counters

Terms of Service - Privacy Policy - Ice Box

Kingwood Underground