Kingwood Underground
the heart and soul of our Kingwood, Texas family
Login - Create Account - Help
Clean out your garage on Kingwood bookoo! Or find local garage sales on Yard Sale Search.com
KU Live!

I'm off to buy a drill - what's the difference between

who's talking here?

Sue 1
goots1 1
Fin and Feather 2
NoCitySlicker 2
Perfection 5
goatlady 2

     » send to friend     » save in my favorites     » flag dangerous topic flag as a dangerous topic

Perfection --- 17 years ago -

a regular electric drill and a hammer drill? And 3/8 drill vs a 1/2 drill? I am wanting/needing to have one for a few repairs around here and I think the deepest I will need to drill is a 3 inch screw through two 2x4s. Thanks! 

goatlady --- 17 years ago -

Any drill will do that, you don't need a hammer. 1/2 is probably better to buy. More power. 

Perfection --- 17 years ago -

thanks goatlady, so the 3/8 and 1/2 mean different power stuff? I just want one that is easy to use. I'm a pretty lazy person so I want the drill to do the work not me LOL. 

Sue --- 17 years ago -

My DH used to work at HD in hardware before he retired. He says that a hammer drill will twist and bang at the same time. You should buy that kind as you'll have everything that you want or need. A 1/2" is what you want, better than the 3/8. 

Perfection --- 17 years ago -

thanks Sue. not sure now but twisting and banging sound kind of fun in a weird way........ This could be more fun than I thought 

goatlady --- 17 years ago -

This could be more fun than I thought  i love power tools! 

NoCitySlicker --- 17 years ago -

not sure now but twisting and banging sound kind of fun in a weird way........ This could be more fun than I thought ROFLMAO How big a hole are you going to drill three inches deep? It sounds like you just need 3/8 inch and no banging and twisting drill. Drilling a couple of 2x4's is not hard. Why are you drilling? Are you bolting them together or are you screwing them? I never drill for screws unless it is a finish job. 

Perfection --- 17 years ago -

The nice man at home depot told me to get a 3/8 one, sold me a set of bits(?) and told me to predrill through one of the boards but not the second one and then sent me on my way. My goal tomorrow - use this dang thing!!! wish me luck NoCitySlicker, I am just going to screw them together - I am using a 3" screw to make sure it gets enough of the other piece of wood to really hold it. 

NoCitySlicker --- 17 years ago -

Sounds like you are using deck screws. He told you right. If you are going to drill just drill one. I never drill for deck screws. It does make it easier however..Good Luck..and be careful!!! 

Fin and Feather --- 17 years ago -

½ has enough torque to break a wrist when in a bind.. don’t get it for normal applications unless you plan on using larger shank drill bits. Hammer drills are for drilling into masonry and concrete, 50% of them don’t do the enough to even matter so I wouldn’t spend any extra unless it’s just something you want. I picked up a cheap skill 3/8 from Lowes about 8 years ago and it has done quite the job on all our decks and fencing needs and is still in use today. 

Perfection --- 17 years ago -

Ok none of you all said it was going to be this hard. I tried putting in the screw and it just sat that. Why don't the instructions say you have to push like you are giving birth?????? Holy boloney 

Fin and Feather --- 17 years ago -

yep Exposed or sun dried wood can turn out to be quite the task, might take the time to add a pilot hole to make it easier on the next one. 

goots1 --- 17 years ago -

Do you have it in forward? LOL 

page 1
Login to add your comments!

see more discussions about...


Online now:
hit counters

Terms of Service - Privacy Policy - Ice Box

Kingwood Underground